What is the purpose of keeping tremie pipe’s tip immersed in freshly-placed concrete for about 1m in underwater concreting?

  What is the purpose of keeping tremie pipe’s tip immersed in freshly-placed concrete for about 1m in underwater concreting? The size of tremie pipe is about 300mm with sections having flange couplings fitted with gasket to prevent water leakage. The tremie pipe should be closed initially to prevent water from entering the pipe. It should be designed with sufficient thickness and weight so that it would not be buoyant when empty inside water. The placement of tremie concrete is commenced by putting the closed pipe underwater to the location for concreting, followed by partial filling of tremie pipe with concrete. In order to have tremie concrete flowed out of the pipe, it is necessary to fill the pipe with concrete of sufficient height to overcome the water pressure and frictional head. After that the tremie pipe is raised about 150mm to allow concrete to flow out. To enhance sufficient bonding, each succeeding layer of concrete should be placed before the preceding layer has reached
Post a Comment

Contact Us

NAME: MOHAMMED DANISH

E-Mail ID: taj.d2019@gmail.com

Comments

New comments are not allowed.

Popular posts from this blog

What is the purpose of keeping tremie pipe’s tip immersed in freshly-placed concrete for about 1m in underwater concreting?

  What is the purpose of keeping tremie pipe’s tip immersed in freshly-placed concrete for about 1m in underwater concreting? The size of tremie pipe is about 300mm with sections having flange couplings fitted with gasket to prevent water leakage. The tremie pipe should be closed initially to prevent water from entering the pipe. It should be designed with sufficient thickness and weight so that it would not be buoyant when empty inside water. The placement of tremie concrete is commenced by putting the closed pipe underwater to the location for concreting, followed by partial filling of tremie pipe with concrete. In order to have tremie concrete flowed out of the pipe, it is necessary to fill the pipe with concrete of sufficient height to overcome the water pressure and frictional head. After that the tremie pipe is raised about 150mm to allow concrete to flow out. To enhance sufficient bonding, each succeeding layer of concrete should be placed before the preceding layer has reached
Read more

HOW DO YOU INSTALL ELECTRICAL CONDUIT ON CONCRETE SLAB???WHAT IS THE SPECIFICATION FOR SLAB CONDUITING???

Image
SLAB CONDUITING 1)   Preparation of slab conduiting drawing by electrical contractor. 2)   Verification by electrical dept. and approval by Engg dept authorized signatory. 3)   Slab conduiting on site as per approved plan. Accessories for Slab Conduiting 1)    PVC Pipes. 2)   Junction Boxes (1 Way to 4 Ways) 3)   Fan Junction Box 4)   Couplers 5)   Reducers 6)   Bends 7)   PVC Cement Solvent 8)   Paint STANDARD SPECIFICATION FOR SLAB CONDUITING 1)  Conduiting should be done only after slab re-bars are laid and after fixing of PVC cover. 2)  Gap between adjacent conduits should be min. 25mm. 3)  Conduits should not pass through RCC Column. 4)  Conduit drops should be on wall face only. 5)  Conduits should not be in cover zone of re-bars. 6)  Light / Fan points should be painted for easy identification on slab surface soffit (slab shuttering). 7)  Conduits & Junction openings to be sealed to avoid choking and should be touching shuttering. 8)  Light / Fan / TV / Tel. / Bracket light
Read more

What Is GGBS ?? What is the advantage of using GGBS as replacement of cement in concrete??What Is The Differences Between GGBS and PFA

What is GGBS?? GGBS (ground granulated blast furnace slag). What is the advantage of using GGBS as replacement of cement in  concrete? From structural point of view, GGBS replacement enhances lower heat of  hydration, higher durability and higher resistance to sulphate and chloride  attack when compared with normal ordinary concrete. On the other hand, it  also contributes to environmental protection because it minimizes the use  of cement during the production of concrete. However, it is identified that there are still some hindrances that prevent the  prevalence of its usage in local market. Technically speaking, GGBS  concrete suffers from lower rate of strength development which is highly  sensitive to curing conditions. In this connection, certain site measures  have to be introduced to the construction industry to ensure better quality  of curing process in order to secure high quality of GGBS concrete. On the  other hand, designers have to be cautious of the potential bleeding 
Read more